PEVT和AEVT在实验室和在线运行状态下误差特性比较研究.doc

PEVT和AEVT在实验室和在线运行状态下误差特性比较研究.doc

  1. 1、本文档共7页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
PEVT和AEVT在实验室和在线运行状态下误差特性比较研究

PEVT和AEVT在实验室和在线运行状态下误差特性比较研究 胡浩亮1,3,陆以彪2,徐子立1,李登云1,熊前柱1,肖霞3 (1. 中国电力科学研究院,武汉 430074; 2. 黑龙江省电力有限公司电能计量中心,哈尔滨 150001; 3. 华中科技大学,武汉,430074) 摘要: PEVT和AEVT是目前在电网投运的两类典型EVT,但其投运前均需在现场对误差特性进行二次定标。为了研究EVT实验室和在线运行状态下的误差特性,选取业内两主流厂家的PEVT和AEVT试品,对其开展了实验室和在线运行为期一年多的误差特性比较研究。结果表明,测试环境对PEVT比差的影响低于0.05%,实验室温度特性在-40°C ~ +53.5°C温度范围内,比差变化最大达4.3%;现场运行时的温度特性在温度范围-20°C ~40°C之间,比差的变化为0.55%。AEVT对测试环境敏感,比差从实验室时0.03%、现场离线为0.18%,现场在线变为0.36%;但其温度特性较好,实验室温度特性在-40°C ~+63°C的温度范围内,比差变化为0.21%,AEVT现场温度特性在温度范围-20°C ~40°C之间,比差的变化在0.1%以内。另外,EVT的温度特性对温度变化梯度敏感,现场实际运行时的温度特性优于实验室的温度特性。 关键词:PEVT;AEVT;测试环境;在线运行;误差特性 DOI:   文章编号: Research on error characteristics of PEVT and AEVT under the conditions of laboratory and on-line operation Hu Haoliang1,3, Lu Yibiao2, Xu Zili1, Li Dengyun1, Xiong Qianzhu1, Xiao Xia3 (1. China Electric Power Research Institute, Wuhan 430074, China. 2. Electric Energy Metering Center of Heilongjiang Electric Power Company, Harbin 150001, China. 3. School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China) Abstract: PEVTs and AEVTs are currently two kinds of typical EVTs in operation of power grid, but they would be required to calibrate error characteristics again before the operation. In order to research error characteristics of EVTs in three states of laboratory and field off-line and on-line operation, PEVT and AEVT samples from two mainstream manufacturers were selected to carry out the comparative study of error characteristics. The results show that the effect of the testing environment on ratio error of PEVT is less than 0.05%; however, the variable quantity of ratio error in laboratory is 4.3% with the temperature in –40℃~+53.5℃ and 0.55% in on-line operation in the temperature range of - 20℃ ~ 40℃. The ratio error of AEVT is sensitive on the test environment with the error from laboratory 0.03%, off-line scene 0.18% and on-line operation 0.36%; but the variable quantity of ratio error in laboratory is 0.21% wit

您可能关注的文档

文档评论(0)

wyw118 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档