Skip to main content

Advertisement

SpringerLink
Log in

Design, analysis and fabrication of 4H–SiC diaphragm for piezoresistive MEMS pressure sensor

  • Original Article
  • Published:
ISSS Journal of Micro and Smart Systems Aims and scope Submit manuscript

Abstract

A diaphragm-based MEMS pressure sensor, suitable for harsh environments, was designed, simulated, analyzed and virtually fabricated on p-type SiC epitaxial semi-insulating 4H–SiC substrate to measure the external pressure in the range of 0–8 MPa using device simulation software. The critical component of the pressure sensor is a thin flat square SiC diaphragm with an area of 1500 µm × 1500 µm and thickness of 75 µm. The area and thickness were optimized by performing computer simulation using the finite element method of simulation. The p-type SiC resistors were virtually fabricated in Wheatstone bridge configuration on top of the SiC diaphragm to convert the mechanical stress signal, generated due to external pressure into an electrical output voltage signal. The 4H–SiC MEMS pressure sensor was virtually fabricated on high-purity semi-insulating SiC substrate by dry etching method and its sensitivity was obtained at 2.42 µV/V/KPa for the operating pressure range. A thin SiC diaphragm was fabricated toward the realization of the SiC piezoresistive MEMS pressure sensor.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  • Akiyama T, Briand D, Rooij NF (2011) Piezoresistive n-type 4H–SiC pressure sensor with membrane formed by mechanical milling. Proc IEEE Sens 222–225

  • Barlian AA, Park W-T, Mallon JR, Rasteger AJ, Beth LP (2009) Review: semiconductor piezoresistance for microsystems. IEEE Conf Proc 97(3):513–552

    Article  Google Scholar 

  • Dowling KM, Ransom EH, Senesky DG (2017) Profile evolution of high aspect ratio silicon sarbide trenches by inductive coupled plasma etching. J Microelectromech Syst 26:135–142

    Article  Google Scholar 

  • Eickhoffa M, Mollera H, Kroetza G, Bergb JV, et al (1999) A high temperature pressure sensor prepared by selective deposition of cubic silicon carbide on SOI substrates. Sens Actuators A 74:56–59

    Article  Google Scholar 

  • Hou SM-C (2003) Design fabrication of MEMS-array pressure sensor system for passive underwater navigation inspired by the lateral lines. Dissertation, Massachusetts Institute of Technology

  • Hsu T-R (2008) MEMS and microsystems: design manufacture and nanoscale engineering. Wiley

  • Lebedev AA, Ivanov AM, Strokan NB (2004) Radiation resistance of SiC and nuclear-radiation detectors based on SiC films. Semiconductors 38(2):125–147

    Article  Google Scholar 

  • Mario DG (1982) Flat and corrugated diaphragm design handbook. CRC Press

  • Mehregany M, Zorman CA, Razan N, Wu CH (1998) Silicon Carbide MEMS for harsh environments. IEEE Conf Proc 86(8):1594-1609

  • NajafiSohi A (2013) A multifunctional MEMS pressure and temperature sensor for harsh environment application. Dissertation, University of Waterloo

  • Nguyen T-K, Phan H-P, DinhToan TT, Nakamura K, Foisal ARM, Nguyen N-T, Dao DV (2018) Isotropic piezoresistance of p-type 4H–SiC in (0001) plane. Appl Phys Lett 113:012104

    Article  Google Scholar 

  • Okojie RS, Ned AA, Kurtz AD (1998) Operation of α (6H)-SiC pressure sensor at 500°C. Sens Actuators A 66:200–204

    Article  Google Scholar 

  • Okojie RS, Lukco D, Nguyen V, Savrun E (2015) 4H–SiC piezoresistive pressure sensors at 800°C with observed sensitivity recovery. IEEE Electron Device Lett 36(2):174–176

    Article  Google Scholar 

  • Sawhney AK (1995) Electrical & electronics measurement and instrumentation. Dhanpat Rai & Sons New Delhi

  • Shore JS, Goldstein D, Kurtz AD (1993) Characterization of n-type β-SiC as a piezoresistor. IEEE Trans Electron Devices 40(6):1093–1099

    Article  Google Scholar 

  • Tanaka S, Rajanna K, Abe T, Eshashi M (2001) Deep reactive ion etching of silicon carbide. J Vac Sci Tech B 19(6):2173–2176

    Article  Google Scholar 

  • Wieczorek G, Schellin B, Obermeier E, Fagnani G, Drera L (2007) SiC based pressure sensor for high-temperature environments. IEEE Sensors Conf Proc 748–751

  • Wijesundara MBJ, Azevedo RG (2011) Silicon carbide microsystems for harsh environments. Springer, London

    Book  Google Scholar 

  • Wu C-H, Stefanescu S, Kuo H-I, Zorman CA, Mehregany M (2001) Fabrication and testing of single crystalline 3C–SiC piezoresistive pressure sensors. Transducers’ 01 Eurosensors XV Springer

  • Zappe S, Franklin J, Obermeier E, Eickhoff M, Moller KG, Rougeot C, Lefort O, Stoemens J (2001) High temperature 10 bar pressure sensor based on 3C-SiC/SOI for turbine control applications. Mater Sci Forum 353–356:753–756

    Article  Google Scholar 

  • Zettterling C-M (2002) Process technology for silicon carbide devices. INSPEC: UK

Download references

Acknowledgements

Authors would like to thank all the scientific and technical staff of Electronics & Instrumentation Group, Material Science Group of IGCAR and IITM, Chennai. The authors also would like thank to Dr. Santanu Parida, MSG, IGCAR for preparation of the paper.

Author information

Authors and Affiliations

  1. Real Time Systems Division, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute, Kalpakkam, Tamil Nadu, 603102, India

    Mahesh Kumar Patankar, M. Kasinathan, R. P. Behera & T. Jayanthi

  2. Electrical Engineering Department, Indian Institute of Technology Madras, Chennai, Tamil Nadu, 600 036, India

    Aparna Gupta & Nandita DasGupta

  3. Surface and Nanoscience Division, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute, Kalpakkam, Tamil Nadu, 603102, India

    Sandip Dhara

Authors
  1. Mahesh Kumar Patankar
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Aparna Gupta
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. M. Kasinathan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. R. P. Behera
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. T. Jayanthi
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Nandita DasGupta
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Sandip Dhara
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mahesh Kumar Patankar.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Patankar, M.K., Gupta, A., Kasinathan, M. et al. Design, analysis and fabrication of 4H–SiC diaphragm for piezoresistive MEMS pressure sensor. ISSS J Micro Smart Syst 10, 41–50 (2021). https://doi.org/10.1007/s41683-021-00068-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s41683-021-00068-3

Keywords

Search

Navigation