[ROM][CM10][4.1.2][GSM][07-Dec-2012] Sapir - CM10 based + tablet mode +++
- Thread starter erezak
- Start date
@humberos, I have installed your CM10 ROM 31/08 and when I hold up the home button, it doesn't come the recent apps...
I can confirm the wallpaper issue is there on the three one builds. To get it all you have to do is go to 240 dpi, on-screen navigation buttons, left navigation (landscape).
Apply a new wallpaper and it'll be full-size, but as soon as you swipe left or right go back, you'll notice that it is cut off by about a half inch.
Had one freeze, and everything is smooth until you multitask. For example, Power Amp playing and using Waze for navigation.
For others wondering, phantom voicemail still exists.
Thanks for all the hard work.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
---------- Post added at 11:35 AM ---------- Previous post was at 11:32 AM ----------
Donation sent as promised, go get lunch on me.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
Apply a new wallpaper and it'll be full-size, but as soon as you swipe left or right go back, you'll notice that it is cut off by about a half inch.
Had one freeze, and everything is smooth until you multitask. For example, Power Amp playing and using Waze for navigation.
For others wondering, phantom voicemail still exists.
Thanks for all the hard work.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
---------- Post added at 11:35 AM ---------- Previous post was at 11:32 AM ----------
Donation sent as promised, go get lunch on me.
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
I just downloaded and attempted to install the 31 Aug Build
I am in a loop:
What should I do?
The screens I see are:
Black Screen with Samsung Logo
CyanogenMod Icon
The Install steps with green Android logo - then back to black screen with samsung Logo
This last screen can only be seen for half a second. Took a photo. It says:
(Following is not every line)
CWM Basd recovery v6.0.1.2
SD Card Mounted
Veifying SD card Marker
SD Card Not found
Checking Internal SD card Marker ...
--Installing:
Finding Update Packade...
E:unknown volume Path[]
E: Can't mount
There may be other lines I cannot see
Any advice welcome
ColinK
I am in a loop:
What should I do?
The screens I see are:
Black Screen with Samsung Logo
CyanogenMod Icon
The Install steps with green Android logo - then back to black screen with samsung Logo
This last screen can only be seen for half a second. Took a photo. It says:
(Following is not every line)
CWM Basd recovery v6.0.1.2
SD Card Mounted
Veifying SD card Marker
SD Card Not found
Checking Internal SD card Marker ...
--Installing:
Finding Update Packade...
E:unknown volume Path[]
E: Can't mount
There may be other lines I cannot see
Any advice welcome
ColinK
schrickz
Senior Member
having this problem too few days back with cm9 , I asume that you may forgot to flash the kernel ..
Thanks for your input.
I followed the instructions here - down to instruction 6
Tap install zip from sdcard and hit choose zip from sdcard. Browse and locate the ROM file on the SD card and select it. Confirm installation by choosing Yes on the next screen. The ROM should begin installing.
http://www.ibtimes.co.uk/articles/377061/20120824/update-galaxy-tab-p1000-android-jellybean-cm10.htm
Then the loop started. What did I miss?
Thanks CK Venture
I tried installing the build from 31st Aug, & it gave an error while installing the zip file & aborted the installlation.it happened several times...please look into this. I think the zip file is corrupted or invalid data present in it.
Eject your microsd card and try again
Hi
Thanks for your input.
I am in !! and installed.
The instructions I followed said to install on internal SD card, so removing External card had no effect.
After a forced shut down (Hold Power for 15 Seconds),it re-started and went into the loop again.
Second time i managed to do Re-start in recovery Mode and into CWM
Followed exactly the same instructions again -
All seems well.
It found every network in the street except mine - had to re-start my router.
Now to start using it and hope all is well.
Thanks to everyone.
ColinK
This sort of thing used to happen in CM nine if you had USB cable plugged into the tablet, or the tablet plugged into a dock when you flashed. Did you have either of these going on?
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
Blasted from my HTC Rezound (Zone23s Newtified 3.2.1)
Kat-CeDe
Senior Member
Hi,
the boot loop when using external SD is not so serious. I think the first installation only installed kernel and could not go on the flash the rest. I also had the boot loop but I simply called CWM from the new cyanogen kernel again and started flash again and this time it worked.
Ralf
the boot loop when using external SD is not so serious. I think the first installation only installed kernel and could not go on the flash the rest. I also had the boot loop but I simply called CWM from the new cyanogen kernel again and started flash again and this time it worked.
Ralf
Indeed, Trying to sort it out.
Also, posted new build.
Thanks for all your hard work. Only problem I had with this build is trying to use Chainfire 3D. Once installed it will reboot device and it will stay stuck at the Cyanogen screen. A reboot doesn't fix it. Wiping data in Clockwork doesn't fix it either. Only a fresh install. For me it wasn't a big deal, since I mainly use my tab for youtube and reading. Just something to keep in mind. Has anyone else had this issue at all?
Apart from this, everything I use on a daily basis works just fine, with no FC or Lag. Almost all the games I have work great too. Horn crashes on start up. So that's a bummer. Feel like I've wasted money, but then again it did say it was only for Tegra 2/3 devices. Even though the tab was listed as a device it would run on.
All in all, very awesome Rom! Please keep the updates rolling.
Apart from this, everything I use on a daily basis works just fine, with no FC or Lag. Almost all the games I have work great too. Horn crashes on start up. So that's a bummer. Feel like I've wasted money, but then again it did say it was only for Tegra 2/3 devices. Even though the tab was listed as a device it would run on.
All in all, very awesome Rom! Please keep the updates rolling.
Thanks for all your hard work. Only problem I had with this build is trying to use Chainfire 3D. Once installed it will reboot device and it will stay stuck at the Cyanogen screen. A reboot doesn't fix it. Wiping data in Clockwork doesn't fix it either. Only a fresh install. For me it wasn't a big deal, since I mainly use my tab for youtube and reading. Just something to keep in mind. Has anyone else had this issue at all?
Apart from this, everything I use on a daily basis works just fine, with no FC or Lag. Almost all the games I have work great too. Horn crashes on start up. So that's a bummer. Feel like I've wasted money, but then again it did say it was only for Tegra 2/3 devices. Even though the tab was listed as a device it would run on.
All in all, very awesome Rom! Please keep the updates rolling.
CHAINFIRE 3D doesn't work on any of the JB builds.........Everyone who tried it got a bootloop
Thanks for all your hard work. Only problem I had with this build is trying to use Chainfire 3D. Once installed it will reboot device and it will stay stuck at the Cyanogen screen. A reboot doesn't fix it. Wiping data in Clockwork doesn't fix it either. Only a fresh install. For me it wasn't a big deal, since I mainly use my tab for youtube and reading. Just something to keep in mind. Has anyone else had this issue at all?
Apart from this, everything I use on a daily basis works just fine, with no FC or Lag. Almost all the games I have work great too. Horn crashes on start up. So that's a bummer. Feel like I've wasted money, but then again it did say it was only for Tegra 2/3 devices. Even though the tab was listed as a device it would run on.
All in all, very awesome Rom! Please keep the updates rolling.
Chainfire 3D is not support jelly bean yet.
Sent from my GT-P1000 using Tapatalk 2
could someone confirm if vpn connection works on this build? didn't work on other builds so far
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
55CM10 based ROM from CyanogenMod Gerrit.
Credit goes to cyanogen, the CyanogenMod dev team, and the CM maintainers for the devices.
My plan is to keep refreshing the nightlies.
This is for P1000 GSM.
Directly from CyanogenMod forum:
Code:#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Download
Changelog (in site)
Open Issues:
(Yes, the image is Galaxy Nexus)
55Dear Erez,
When are you going to publish an update? I'm really interested in it
Hi Guys,
I really have to apologise. The project has not been abandoned, just neglected.
I'm swamped at work, and don't have the time to update it at the moment, but I'm doing my best to return to it - currently trying to compile my changes back into the 4.2.x code.
New posts
-
-
-
-
Development [ROM][A14][Pixel 7 Series] MATRIXX-v10.4.2 [GAPPS][04.19.2024]- Latest: AxxPyrtlexx20
