FLASHING STOCK FIRMWARE (WITH VIDEO)
Hey guys many a times by flashing and modding your device there is very huge risk of SOFT BRICKING your device.Recently i flashed Beats Audio mod on my device and after flashing the mod i got no sound from the device, in these cases flashing stock firmware can be of great use. Or even if you want your warranty back you can use this method. Thjere is already an guide by Omkar$ on same topic but in this guide i will also be posting a video. All credits go to Omkar$.
Things Required
1) ODIN 3.07
2) Samsung USB Drivers
3) Stock firmware(In Second Post)
4)USB Cable
5)Your Galaxy Core
Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DON'T UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On
5)Any Other Problem PM me
Let's Begin
1)Install Samsung Drivers On Your PC
2)Reboot Your PC
3)Download The ODIN 3.07 From the link Above And Extract it.
4)Download The Firmware From Below(2nd Post)
5)Extract The Firmware
6)Turn Off Your Galaxy Core
7)Boot your Galaxy Core into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
8)Now Booting You into the DOWNLOAD mode you will get the warning. Press VOLUME UP TO CONTINUE
9)Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10)When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11)click on PDA button && select the Gt-i8262XXXXXX_i8262XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12) now click on "START" button & it will take 10 minutes to flash the firmware ....
DON"T INTERRUPT THE FLASHING PROCESS OR U MAY BRICK YOUR DEVICE
13) U will see a "PASS" & "RESET" on ODIN application...
14)Kudos You Have The Factory Firmware
Problem's Which Can Occur During Flashing
Q)ODIN GOT STUCK DURING FLASHING??
A)ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
Q2) If your device gets a Boot Loop [ boot animation agian & agian ] ??
A)ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
ANY OTHER PROBLEM PM ME
SUUGESTION BEFORE FLASHING
You may want to backup all of your application by Using Either TITANIUM BACKUP or by APP BACKUP AND RESTORE. Because after flashing the stock firmware your all data and applications will be formatted.
Thanks AND Credit TO
1)Omkar$
2)You People For Trying
3)Internet
VIDEO
As Promised Guys The Video Is Ready Do Like This Video
LIKE
COMMENT
SUBSCRIBE!
DONT SHOW IT MEAN IT PRESS THANKS
Hey guys many a times by flashing and modding your device there is very huge risk of SOFT BRICKING your device.Recently i flashed Beats Audio mod on my device and after flashing the mod i got no sound from the device, in these cases flashing stock firmware can be of great use. Or even if you want your warranty back you can use this method. Thjere is already an guide by Omkar$ on same topic but in this guide i will also be posting a video. All credits go to Omkar$.
Things Required
1) ODIN 3.07
2) Samsung USB Drivers
3) Stock firmware(In Second Post)
4)USB Cable
5)Your Galaxy Core
Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DON'T UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On
5)Any Other Problem PM me
Let's Begin
1)Install Samsung Drivers On Your PC
2)Reboot Your PC
3)Download The ODIN 3.07 From the link Above And Extract it.
4)Download The Firmware From Below(2nd Post)
5)Extract The Firmware
6)Turn Off Your Galaxy Core
7)Boot your Galaxy Core into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
8)Now Booting You into the DOWNLOAD mode you will get the warning. Press VOLUME UP TO CONTINUE
9)Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10)When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11)click on PDA button && select the Gt-i8262XXXXXX_i8262XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12) now click on "START" button & it will take 10 minutes to flash the firmware ....
DON"T INTERRUPT THE FLASHING PROCESS OR U MAY BRICK YOUR DEVICE
13) U will see a "PASS" & "RESET" on ODIN application...
14)Kudos You Have The Factory Firmware
Problem's Which Can Occur During Flashing
Q)ODIN GOT STUCK DURING FLASHING??
A)ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
Q2) If your device gets a Boot Loop [ boot animation agian & agian ] ??
A)ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
ANY OTHER PROBLEM PM ME
SUUGESTION BEFORE FLASHING
You may want to backup all of your application by Using Either TITANIUM BACKUP or by APP BACKUP AND RESTORE. Because after flashing the stock firmware your all data and applications will be formatted.
Thanks AND Credit TO
1)Omkar$
2)You People For Trying
3)Internet
VIDEO
As Promised Guys The Video Is Ready Do Like This Video
LIKE
COMMENT
SUBSCRIBE!
DONT SHOW IT MEAN IT PRESS THANKS
Last edited: